Catalog Parts Menu (all 3 parts pages):
If you are using our 1-3/8 inch round metal posts with
drive sleeves, put
this drive cap on top of the sleeve before driving it down with a
hammer to avoid damaging the top of the sleeve. The drive cap is
re-usable tool that can be counted on to drive in 20 or more
sleeves. For a drive cap used with sleeves for 1-5/8 inch round posts
visit our deer fence website.
Use these 12-inch kinked metal ground stakes to
secure the bottom
flap of your cat enclosure fence to the ground,
placing one stake about every 18 inches along the fence line.
For a volume discount on a bundle of 250 stakes, visit our deer fence website.
We include installation instructions with every kit
sent out -- for our regular cat corral kits, the corral kits with snow
protection, and the cat fence conversion kit. In addition, we make the
installation instructions for all but the cat fence conversion kit available here on this website. To view these
instructions, which you are welcome to print out, click here.
A pair of these mounts can serve to attach an extender arm onto
the wooden side of a building or wooden post. They are used in our
conversion kits for this purpose. Screws not included.
These black 8-inch nylon ties have a breaking
of 120 pounds and are suitable
for attaching both polypropylene and metal hexagrid fencing to
1-3/8 inch round metal posts. However, since the little box on the end
of the tie does not start grabbing until 2 inches have passed through,
use our longer 14-inch ties (available on the deer fence website) to attach fencing to wider posts.
Back to top